0
greathardwaredepot.com
0
Home » Shop » hot sale » 100879 TMT FLOW SWITCH, PILOT, 12GPM

100879 TMT FLOW SWITCH, PILOT, 12GPM

Original price was: $183.54.Current price is: $111.20.

Sale!

80 in stock

SKU: 5193 Category:
Share

Product Description

100879 TMT FLOW SWITCH, PILOT, 12GPM

FEATURES:

  • Micro switch technology eliminates reed switch
  • Highpressure inline flow switch
  • Activates with as little as .5 gpm flow
  • Minimal pressure drop up to 12 gpm
  • Mount in vertical position
 
SPECIFICATIONS:

  • 4000 PSI operating pressure
  • 12 GPM maximum flow
  • 40-180 F operating temperature
  • Lead length: 48″ 18awg
  • 250 VAC switching voltage maximum
  • 5 Amps switching current maximum
  • 30 OHM contact resistance with leads
  • 200,000 operations electrical service life
  • 10 million operations mechanical service life
  • Inlet: 3/8″ FPT
  • Discharge: 3/8″ FPT
  • Pilot: 1/4″ hose barb

    INSTALLATION:

      Install the flow switch

     VERTICALLY 

      to the output side of the unloader, with the 2 conductor lead wires exiting from the top. If your system uses a downstream chemical injector, it should be mounted on the output side of the flow switch. Pilot model requires a direct connection to the water supply feed line to provide a pilot signal. This is accomplished by installing a tee fitting (with a 1/4″ hose barb fitting) directly in the water supply feed line. The tube must be installed before the float valve. Install an appropriate length of 1/4″ ID reinforced polyvinyl tubing between the tee fitting and the valve pilot port.