Yamaha Combination Tachometer-Trim Gauge Chrome Bezel Silver Face | N80-8350T-10-00
The Yamaha Combination Tachometer-Trim Gauge Chrome Bezel Silver Face | N80-8350T-10-00 combines tachometer and trim information in one four-inch backlit Yamaha gauge. It keeps engine RPM and trim position together, which is helpful when making running adjustments from the helm.
This version uses a silver face with a chrome bezel. It belongs with Yamaha’s analog combination gauge family and should be matched by part number to the installed harnessing, sender inputs, and dash layout.
Key Features
- RPM and Trim in One Gauge: Combines two commonly watched readings in a single display.
- Four-Inch Backlit Design: Helps keep the gauge readable in low-light conditions.
- Space-Saving Layout: Reduces the number of separate instruments needed at the helm.
- Finish-Specific Variant: Uses a silver face with a chrome bezel.
- Gauge-Only Part Number: Yamaha notes the listed part number is for the gauge only.
Fitment Note
Confirm that part number N80-8350T-10-00 matches your Yamaha outboard, helm layout, wiring, sender inputs, and existing gauge or rigging system before ordering. Gauge-only part numbers may require separate harnesses, senders, or installation hardware.
FAQ
Q1: What readings are combined in this gauge?
A1: It combines engine RPM and trim position in one four-inch display.
Q2: When is a tachometer/trim combination useful?
A2: It is helpful when you want engine speed and running angle visible in the same place.
Q3: What finish does N80-8350T-10-00 have?
A3: This SKU uses a silver face with a chrome bezel.
Q4: What should be checked before installation?
A4: Verify the tach signal, trim sender, harnessing, dash size, and Yamaha rigging compatibility.
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
